What is a glass edger?

Glass edging machine is one of the earliest and widely used mechanical equipment in glass deep processing equipment. The main function is to smooth, straighten and polish the edges of the flat glass. The correct and reasonable use of edging machine can not only ensure the normal production, but also extend the service life of the machine. The common glass edging machine is mainly three kinds of glass single side machine, glass double side machine and glass shaped edging machine.

The grinding and polishing of glass edge grinding machine is mainly achieved by grinding head motor and grinding wheel. Ordinary single side/double side edging machine can achieve coarse grinding, fine grinding and polishing at the same time. Customers can choose different grinding wheels according to processing requirements.

Glass edging machine is mainly used for the processing of architectural glass, furniture glass and craft glass. It is one of the earliest and most widely used cold processing equipment in glass mechanical deep processing equipment. It is mainly used for grinding and polishing the bottom edge and chamfer of ordinary flat glass. Generally have manual, digital display control, PLC computer control and other configurations. Reasonable operation, daily cleaning and lubrication maintenance can ensure the normal operation of the machine, extend the service life of the machine, and improve the processing output.

Glass edging machine has three characteristics: one is single use, can only grind a variety of straight edges; Second, continuous grinding, high production efficiency. Third, it can grind flat glass of various sizes and thicknesses.

Glass edging machine installation requirements:

The installation of the glass edging machine needs to ensure that the ground is smooth, and that all angles of the machine are level after installation, otherwise it will affect the processing effect. Ensure that the power connection is correct, such as foreign special industrial voltage 415V/50HZ, 220V/50HZ, 220/60HZ, if the power connection is wrong, it may cause the motor or the electrical appliances in the cabinet to burn out (some countries have no leakage protection switch in the factory). The glass edging machine works in the case of water and electricity, and the customer should judge whether the ground water tank configured by the factory is sufficient according to the amount of glass processing.